Stand-Alone Mode; Pedalling Cadence; Heart Rate Monitor (Cardio Bridge); Maintenance - Elite Rivo Anleitung

Stand-alone mode

The home trainer lets you conduct a workout with reduced
functions when it's not connected to a software or app.
This mode features 2 different types of functions:
• Stand-alone with home trainer connected to the power grid
• Stand-alone with disconnected home trainer
Stand-alone with home trainer connected to the power grid
This mode sees the home trainer brake simulated gradient.
The gradient value can be set via the My E-Training app. The
home trainer maintains these settings even when it's not con-
nected to a software or app.
The gradient value can be set as a percentage by the user in
an interval ranging from 0% to 18%.
For more in-depth info about this mode, please visit the sup-
port website support.elite-it.com.
Stand-alone with disconnected home trainer
When the home trainer is disconnected from a power source
it cannot adjust the braking torque nor send workout data, yet
it's still possible to workout.
With this mode, the resistance generated by the home trainer
increases alongside speed based on a value on a scale from
1 to 16.
To adjust the preset braking torque level you must connect
to the home trainer (when powered up) via the My E-Training
app. Once the desired value has been set, the home trainer
will use the preset value when it's not powered up.
For more in-depth info about this mode, please visit the sup-
port website support.elite-it.com.

Pedalling cadence

The roller detects the pedalling cadence with an innovative sy-
stem called sensorless, based on the detection of speed swings.
In particular limit conditions, such as low resistance or high
cadence, the returned cadence value may be inaccurate.
Cadence Bridge
The Cadence Bridge functionality allows for connecting an
external cadence sensor and transmitting the cadence data
in the standard FTMS Bluetooth protocol.
The compatible cadence sensors are: Speed&Cadence sen-
sors, Cadence sensors and the power sensors that send the
cadence value.
The function allows the roller to act as a concentrator of in-
formation from external sensors to facilitate the connection
between the software/app and the roller/sensor system.
The Cadence Bridge mode can be activated via the My
E-Training app. When the roller receives the command, it
begins the search for a heart rate monitor via the Bluetooth
protocol, linking itself with the nearest device.
During the search procedure the blue LED on the roller board
flashes.
The result of the search will be reported on the My E-Training
app.
Through the app, it is possible to disconnect the cadence
sensor from the roller.

Heart rate monitor (Cardio Bridge)

The Cardio Bridge functionality allows for connecting a heart
rate monitor to the roller and transmitting the heart rate data
in the standard Bluetooth FTMS roller protocol.
The Cardio Bridge function allows the roller to act as a con-
centrator of information from external sensors to facilitate the
connection between the software/app and the roller/sensor
system.
The Cardio Bridge mode can be activated via the My E-Trai-
ning app. When the roller receives the command, it begins
the search for a heart rate monitor via the Bluetooth protocol,
linking itself with the nearest device.
During the search procedure the blue LED on the roller board
flashes.
The result of the search will be reported on the My E-Training
app.
Through the app, it is possible to disconnect the heart rate
monitor from the roller.

MAINTENANCE

Before any maintenance or cleaning operation,
stop using the home trainer, disconnect it from
the power source and wait at least 20 minutes
so the brake cools down.
• Wipe it with a cloth after every workout to prevent the de-
posit of dust or sweat;
• Do not conduct any cleaning operation on the bicycle or
chain when the bicycle is on the home trainer as the deter-
gents might irreparably damage the bearings or other internal
mechanical parts;
• It is possible that after many workouts or after particularly
intense ones the tension of the transmission belt decreases,
this would translate to some skipping;
Belt tensioning must be conducted only with
approval from the Manufacturer.

EU product disposal

This product complies with the EU 2002/95/CE and 2003/108/
CE regulations.
The waste bin symbol on the product or its
packaging indicates that the product must be
collected separately from other waste.
The customer will therefore have to dispose of the
product, at the end of its life cycle, in the proper separate
waste collection areas for the disposal of electronic objects or
give it back to the retailer when purchasing a new equivalent
product with a 1 to 1 ratio.
Proper separate waste collection saves the environment we
live in, its public health and allows for the recycling/ of the
materials it's made of.

Extra EU product waste collection

Please contact the local auhtorities and get info on regula-
tions and waste supply methods if you wish to dispose of
this product.
EN
59