Front Brake; Rear Brake - Beta ALP 4.0 Bedienungsanleitung

FRONT BRAKE

Check
To check the wear of the front brake,
visually inspect the brake pad ends by
looking at the brake caliper from the front.
The brake linings should be at least 2 mm
thick. If the linings are thinner, replace the
pads immediately.
Note:
Carry out the control procedure respect-
ing time intervals and mileage indicated
on the chart on page 145.

REAR BRAKE

Check
To check the wear of the rear brake, visu-
ally inspect the brake pad ends by looking
at the brake caliper from above. The brake
linings should be at least 2 mm thick. If
the linings are thinner, replace the pads
immediately.
Note:
Carry out the control procedure respect-
ing time intervals and mileage indicated
on the chart on page 145.
ALP
MOTARD
135
3
GB