Running-In - Beta ALP 4.0 Bedienungsanleitung

RUNNING-IN

The running-in period lasts approximately
10 hours, during which it is advisable to:
• Warm up the engine well before starting
off.
• Avoid riding at constant speed (changing
the speed allows the different components
to bed in uniformly and in a shorter time).
• Avoid turning the throttle twist grip more
than 3/4 of its travel.
WARNING:
After the fi rst 1000 km renew the engine
oil.
IMPORTANT:
It is necessary to make sure that after
running for 1000 Km., the metallic fi lter,
positioned on the fi nal part of the oil tank,
is clean (see page 124). If it should not
be clean, use compressed air to clean it.
• Always use high-octane unleaded petrol.
• After using the vehicle on rough ground
for the fi rst time, carefully check the
tightening of all nuts and bolts.
117
2
GB