Recommendation For Use Of Repeater; Commissioning With The Bosch Homecom Easy App - Bosch Src 100 Rf Installations- Und Bedienungsanleitung

▶ Transfer data to the system.
After transferring the data (QR code and room data) from the
EasyService app to the system, it is then necessary for the individual
controls and, if applicable, the repeater to actively report to the system
via radio (868 MHz) for final integration. To do this, a button must be
pressed on the individual control and repeater.
▶ Follow the instructions in the app.
The individual controls and, if applicable, the repeaters then report their
QR code data to the system, which synchronises the data. If the
synchronisation is positive, the relevant individual control is integrated
into the system.
The device overview in the app can then be used to check the status of
the respective devices and whether the connection was successful. The
device overview shows a list of all individual controls and repeaters that
are connected to the system.
If the connection process has not yet been completed, Prepared for
connection is displayed in the app. In this case, select the relevant
device in the app and follow the instructions of the app.
4.3

Recommendation for use of repeater

The wireless range within a building depends on structural (concrete
ceilings, thick walls, etc.) and local conditions (Item K 30 RF/K 40 RF,
...). Therefore, no generalised distance can be specified for indoor
areas.
The range of WLAN (2.4 GHz) and radio (868 MHz) differ greatly. Radio
generally has a significantly greater range than WLAN.
The radio symbol in the app shows how strong the wireless connection
between the individual control and the system (K 30 RF/K 40 RF) is.
If the wireless range is not sufficient, the range can be extended by using
the repeater. Even if the wireless connection to one or more individual
controls is weak, we recommend the use of a repeater for stability
reasons.
Design conditions affect the wireless range. For example, closing a door
can lead to a loss of connection if this individual control already only had
a weak wireless connection when the door was open.
The strength of the wireless connection can be easily checked using the
EasyService app. This is possible using the device overview. This is
always displayed after the app has transferred the data from the
individual controls to the system. Optionally, the device overview can
also be called up separately in the app.
SRC 100 RF – 6721856014 (2024/11)
4.4

Commissioning with the Bosch HomeCom Easy app

The system must first be configured accordingly ( Chapter 4.1 and
4.2 If the individual control is not activated in the system operation, it
cannot be displayed and used in the Bosch HomeCom Easy app.
Use of the Bosch HomeCom Easy app is optional, but opens up
additional functions and options ( Chapter 6.3).
To use the Bosch HomeCom Easy app, K 30 RF/K 40 RF must be
connected to the Internet and the Bosch HomeCom Easy app
downloaded from the relevant app store ( Installation instructions for
K 30 RF/K 40 RF).
Connecting individual controls to the system with the Bosch
HomeCom Easy app
The Bosch HomeCom Easy app also allows you to connect individual
controls and repeaters to the system, manage them and make changes,
for example to the room name or room assignment:
▶ Follow the instructions in the Bosch HomeCom Easy app.
Commissioning
59