System Overview And Compatibility; System Overview Of Individual Controls For Radiators; Compatible Wall Mounted Condensing Boilers; Required Components - Bosch Src 100 Rf Installations- Und Bedienungsanleitung

3

System overview and compatibility

Individual control is a feature that can be activated by using certain
components. Individual control for underfloor heating can only be used
in combination with heat pumps, and individual control for radiators can
only be used with wall hung condensing boilers.
The individual control can be activated for one heating circuit. If a
heating system comprises several heating circuits, the individual control
can be activated in one of the heating circuits. Other control units/
remote controls can be used in the remaining heating circuits. The
system remote control RT 800 can also be located in the same heating
circuit as the individual control( Chapter 5.3).
3.1

System overview of individual controls for radiators

1
2
3
Fig. 1 System overview of individual controls for radiators
[1] Outside temperature sensor
[2] Wall mounted condensing boiler
[3] System operation (UI 800)
[4] K 30 RF/K 40 RF
[5] Router / Internet connection (optional)
[6] App EasyService (for commissioning and maintenance only)
[7] App Bosch HomeCom Easy (optional)
[8] Individual controls for radiators
Radio 868 MHz
WLAN 2.4 GHz
3.1.1

Compatible wall mounted condensing boilers

The individual control for radiators is compatible with:
• Wall mounted condensing boilers with system operation UI 800 from
software version NF49.04 (used in production from approx. 2023).
• Floor standing condensing boilers with system operation UI 800
from software version NF49.10 (used in production from
approx. mid 2024).
• Hybrid systems comprising
– a hybrid-capable wall-hung or floor-standing condensing boiler
with UI 800 and respective software version (see above)
– respective Bosch heat pump (hybrid package with Hybrid
Manager MH 200).
SRC 100 RF – 6721856014 (2024/11)
The configuration options, such as the number of possible heating
circuits, compatibility of the remote controls or heating circuit modules,
etc., depend on the system operation used.
Use the individual control only with compatible heat generators. Device
or country-specific adaptations can lead to deviations from the
compatibility criteria described below. Before purchasing a heat
generator and individual control components, enquire about the
compatibility of the heat generator as well as the availability of the
required optional components in the respective country.
4
5
6 7
For hybrid applications, Outside temp.-compensated or Outside
temp. with base point must be set as the control type in the relevant
heating circuit. Manual heating curve settings are also required.
The current software version of the system operation (UI 800) in the
heat generator can be read out directly on the UI 800.
3.1.2
Required software versions of the components  Chapter 3.3.
• Bosch Connect-Key K 30 RF or K 40 RF
• Individual controls for radiators
• Outside temperature sensor
• App EasyService (temporarily for commissioning)
3.1.3
Required software versions of the components  Chapter 3.3.
• App Bosch HomeCom Easy
• Repeater
System overview and compatibility
1 – 16
8

Required components

Optional components

1 – 16
8
0010047102-002
53