Bosch SRC 100 RF Installations- Und Bedienungsanleitung Seite 58

Commissioning
Fig. 8 Example of wall hung gas condensing boiler; individual control
radiator
▶ Activate Establish connection.
Fig. 9 Example of wall hung gas condensing boiler; individual control
radiator
As soon as Establish connection is active, K 30 RF/K 40 RF opens a
WLAN hotspot to which the smartphone can be connected. The
system controller UI 800 displays a QR code that can be scanned
with the EasyService app.
Fig. 10 Example QR code for WLAN hotspot
For data protection reasons, the WLAN hotspot is automatically closed
after a certain time; the remaining time is displayed accordingly in the
system controller UI 800. The WLAN hotspot can also be closed
manually.
58
▶ Start the EasyService app.
▶ Select Single Room Control in the menu.
▶ Follow the instructions in the app.
0010047152-001
Fig. 11 Example Call up pairing function
The application for connecting the individual controls in the EasyService
app does not require a permanent WLAN connection to the system. You
can move freely around the building while scanning the QR codes and
0010047153-001
assigning the rooms. A WLAN connection is only required again for the
final data transfer from the EasyService app to the system. If there is no
WLAN connection at the start of the data transfer, the app automatically
informs you how the connection can be re-established.
▶ Scan the QR codes of the individual controls.
2.
Fig. 12 Example Scan individual control radiator QR code
0010053752-001
Fig. 13 Example Scan individual control floor heating QR code
▶ Assign individual controls and repeaters to the rooms using the
EasyService app.
0010047160-002
1.
0010047354-001
0010051091-001
SRC 100 RF – 6721856014 (2024/11)