Functions Of The Individual Control - Bosch Src 100 Rf Installations- Und Bedienungsanleitung

Information on individual control
2.3

Functions of the individual control

Further details on the functionalities are explained in the Chapter 6.
• App Bosch HomeCom Easyfor intuitive operation of the individual
control at any time and anywhere (internet connection of the
K 30 RF/K 40 RF required)
• Individual room temperature-dependent control and adjustable
time program in each room (Bosch HomeCom Easy app required)
• Individual controls can be grouped for convenient and quick
operation
• Ventilation detection (for individual control of radiators)
• Temperature monitoring observes and compares temperatures in
the system and generates an error message if, for example, a room is
not warm due to a defective valve.
• Adaptive heating curve ensures high efficiency through demands-
based flow temperature control
• Automatic hydraulic balancing for even heat distribution in all
rooms (with individual control for radiators)
• Automatic operating mode change of the individual controls
(heating, cooling, off and holiday mode)
• Rooms (e.g. bathrooms) can be automatically excluded from cooling
mode or preconfigured with regard to behaviour after changing
operating mode ( Chapter 6.8).
• Control of cooling mode according to demand and humidity
• High condensation protection in cooling mode thanks to multiple
networked humidity sensors
• Easier planning and commissioning because settings for the
heating curve and radiators (hydraulic balancing) are no longer
mandatory
• Particularly easy to install because individual control, installation
and operation are possible without the Internet.
52
SRC 100 RF – 6721856014 (2024/11)