Connecting The Individual Control To The System - Bosch Src 100 Rf Installations- Und Bedienungsanleitung

Einzelraumregelung

Inhaltsverzeichnis

Fig. 4

Example of wall hung gas condensing boiler; individual control

radiator

Fig. 5

Example of wall hung gas condensing boiler; individual control

radiator

Further settings are required depending on the selected control type.

The control type Single room-dependent calculates the flow

temperature automatically ( Chapter 6.4) and does not require any

heating curve settings in comparison to the Outside temp.-

compensated control type.

The maximum heating circuit temperature for heating mode or for a

possible cooling mode, the minimum flow temperature and the distance

to the dew point must be set in all cases.

For hybrid applications (Chapter 3.1.1), only set the weather-

compensated or outdoor temperature with base point control type and

carry out manual heating curve settings.

SRC 100 RF – 6721856014 (2024/11)

▶ Activate or deactivate automatic hydraulic balancing

( Chapter 6.7).

The function is only possible in combination with individual control

radiator.

0010047131-001

Fig. 6

Example of wall hung gas condensing boiler; individual control

radiator

▶ Activate or deactivate temperature monitoring ( Chapter 6.5).

The function is only possible in combination with underfloor heating

individual control and control type Single room-dependent.

0010047132-001

Fig. 7

Example heat pump individual control underfloor heating

system

4.2.2