Herunterladen Diese Seite drucken

Scheppach SG7100x Originalbetriebsanleitung Seite 37

Vorschau ausblenden Andere Handbücher für SG7100x:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
3.
To do so, remove the used engine oil from a warm
engine and refill with fresh oil.
4.
Remove the spark plug.
5.
Fill the cylinder with approx. 20 ml of oil from an
oil can.
6.
Pull the pull starter (9) slowly so that the oil pro-
tects the inside of the cylinder.
7.
Attach the spark plug again.
8.
When the device is taken out of service for an ex-
tended period of time, before starting work on or
near electrical components, disconnect the bat-
tery connection cable. We recommend removing
the battery (16) and storing it fully charged in a dry
and locked room.
9.
Store the device in a well-ventilated place or area.
14.2 Removing the battery (16) (Fig. 1)
1.
Remove the battery holder by removing the two
hexagonal screws with an open-end spanner SW10.
2.
Remove the battery (16).
3.
Pull the protective caps from both terminals of the
battery (16) and store them safely.
4.
Remove the two pole cables from the battery (16).
Ensure that batteries are secured against unauthorised
use (e.g. by children).
Charge the battery (16) during the winter 1-2 times
to ensure that the full charging capacity is main-
tained. Incorrect storage can damage the battery
(16). In this case, the warranty is void.
14.3
Drain petrol with a petrol extraction pump
In the case of storage over a longer period of time, the
petrol must be drained.
1.
Hold a collection container under the hose of the
petrol extraction pump (not included in the scope
of delivery).
2.
Unscrew the fuel filler cap (1).
3.
Remove the fuel filter insert.
4.
Push the hose of the petrol extraction pump into
the fuel tank (22) and drain out the petrol com-
pletely using the petrol extraction pump.
5.
Reinsert the fuel filter insert.
6.
Retighten the fuel filler cap (1).
15. Ordering spare parts
Please provide the following information in the
event of any enquiries:
Machine data - type plate
Engine data - type plate
Important note in the case of repairs:
For return delivery of the device for repair, please en-
sure for safety reasons that it is free of oil and fuel when
it is sent to the service centre.
15.1
Ordering spare parts
Please provide the following information when order-
ing spare parts:
• Device type
• Device article number
Service information
Note that the following parts on this device are subject
to natural or usage-related wear, or that the following
parts are required as consumables.
Wearing parts*: Spark plug, air filter
* may not be included in the scope of delivery!
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.
Spare parts:
Battery - article no.:
16. Disposal and recycling
Notes for packaging
Notes on the electrical and electronic equipment
act [ElektroG]
Electrical and electronic appliances do not
belong in household waste, but should be
collected and disposed of separately.
• Used batteries or rechargeable batteries that are not
installed permanently in the old appliance must be
removed non-destructively before disposal. Their
disposal is regulated by the battery act.
• Owners or users of electrical and electronic devices
are legally obliged to return them after use.
• The end user is responsible for deleting their per-
sonal data from the old device being disposed of!
www.scheppach.com
39062279011
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
GB | 37

Werbung

loading

Diese Anleitung auch für:

5906229903