– Take special care not to damage stainless
steel surfaces. In particular, avoid the use of
corrosive products and do not use abrasive
materials or sharp tools.
CLEANING THE WELL, BASKET SUPPORT AND ACCESSORIES
To carry out this operation, proceed as follows.
Switch the appliance off and leave it to cool.
1)
Turn off the circuitbreaker to disconnect it
2)
from the electrical mains.
Drain and fi lter the oil (see page 12).
3)
Remove and clean the baskets and the basket
4)
support structure (A).
AUse the lever (B) to swing the heating ele-
5)
ments (C) into the vertical position.
Apply a food-grade detergent to the inside of
6)
the well.
Rinse the well with drinking water and drain.
7)
A
3301300_ut_GB_rev.1
– Remove food residues immediately before
they set.
– Remove the limescale deposits which may
form on some of the appliance's surfaces.
Apply a specifi c product or a water and
8)
vinegar solution to the well to remove the
detergent residues.
Rinse, empty and dry the well.
9)
After use, clean the accessories with a suita-
10)
ble grease-remover product. If possible, wash
in the dishwasher.
Wichtig
When using water for routine cleaning, check
that there are no traces of water left in the
well, on the accessories and in the drain line
before refi lling with oil.
C
B
- 15 -
GB
ENGLISH