Angelo Po 0N1FR1ED Bedienungsanleitung Seite 30

Manual cooking
Proceed as follows.
Press the key (D).
1)
The last value set appears on the display (A).
Press the keys (F-G) to increase or decrease
2)
the values shown on the display.
The cooking time increases or decreases by
30 seconds each time one of the keys (F-G) is
pressed.
Press the key (D) again to start the cooking
3)
cycle.
If the (D) key is pressed after the cooking
cycle is started, the display shows the cooking
time set for 4 seconds.
ACTIVATES/DEACTIVATES THE TEMPERATURE HOLDING (MELTING) FUNCTION)
Proceed as follows.
Press key (E) pto activate the temperature
1)
holding (melting) function.
The light (Q) comes on.
Press key (E) to deactivate the temperature
2)
holding (melting) function.
The light (Q) goes out.
Wichtig
The temperature holding function is always
activated whenever a heating operation is
started with the real temperature in the well
GB below 90°C.
Lighting
Operate the appliance's master switch to con-
1)
nect it to the electrical mains.
The mains light (P) comes on.
Press key (B) to set the appliance in "stand-by"
2)
mode.
The mains power on light (P) goes out and
the display (A) shows the screen shown here.
Press the key (B) to switch on the appliance
3)
and start the cooking cycle.
The cooking temperature set will appear in
red on the display (A).
3301300_ut_GB_rev.1
SETTING THE COOKING TIME
SWITCHING THE APPLIANCE ON AND OFF
F
B
P
- 10 -
A
G D
Q E
A
ENGLISH