Angelo Po 0N1FR1ED Bedienungsanleitung Seite 32

To carry out this operation, proceed as follows.
Wichtig
Before proceeding, allow the appliance to
cool for 10÷15 min., so that the oil reaches a
temperature between 50÷120°C.
Open the door (A).
1)
Fit the extension (B) onto the tap (C).
2)
Place the container (D) and the fi lter (E) both
3)
available as optionals, underneath the exten-
sion (E).
Turn on the tap (C) to empty the well.
4)
Turn off the tap (C) completion of the operation.
5)
Close the door (A).
6)
Caution - Warning
Do not dump oil in the environment; dispose
of it in accordance with the laws in force in
the country of use.
GB
If the safety thermostat is tripped, the appliance
has to be restored to the initial working condi-
tions as follows.
Allow the oil to cool to 30÷40°C.
1)
Open the door (A).
2)
Press the button (B) of the safety thermostat
3)
tripped to restore the electricity supply.
Close the door (A).
4)
3301300_ut_GB_rev.1
FILTERING OIL
RESETTING THE APPLIANCE
- 12 -
A
C
B
B
C
E
D
A
A
ENGLISH