INSTRUCTIONS AND WARNINGS FOR USE AND OPERATION
Important
Besides being authorised and appropriately
documented,and if necessary,instructed and
trained, users,on fi rst usage, have to simulate
several operations to identify the controls
and main functions.
Use only as intended by the manufacturer
and never tamper with any device to obtain
performance levels outside the rated specifi -
cations.
The appliance is fi tted with the controls for use
of its main functions.
Digital display: displays the working parame-
A)
ters and alarm codes.
On/off key: for switching the electricity sup-
B)
ply to the appliance on and off .
Green light on: appliance off
Green light off : appliance on
Temperature setting key: used to set the
C)
cooking temperature and start and/or stop
thermoregulation.
Time setting key: used to set the cooking
D)
time (for information on the use of this fun-
GB
ction, see page 10).
3301300_ut_GB_rev.1
USE AND OPERATION
DESCRIPTION OF CONTROLS
B
C
F
Before use, check that the safety devices are
properly installed and in good working or-
der.
As well as taking care to meet these require-
ments, users must also implement all safety
regulations and read the description of the
controls and the start-up procedure carefully.
Preheating key: activates and deactivates the
E)
function which maintains the temperature at
100°C (melting function).
Value increase key: used to increase the
F)
value of the selected parameter.
Value decease key: used to decrease the
G)
value of the selected paramete. In the event
of alarms, resets the current alarm.
A
E
G
D
- 8 -
ENGLISH