Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Although the appliance is complete with all
safety devices, during installation and connection
additional devices must be added if necessary to
comply with the relevant legal requirements.
The illustration shows the position of the
devices .
Safety thermostat: cuts off the electricity
A)
supply in case of overheating.
The illustration shows the position of the signs
fi tted on the appliance.
Nameplate with manufacturer and
A)
appliance data.
General hazard: read the manual carefully
B)
before carrying out any procedure.
General hazard: when washing the appli-
C)
ance do not point pressurised water jets at
internal parts.
General hazard: all relevant regulations
D)
must be complied with. "Install in compli-
ance with the relevant regulations and use in
well ventilated premises only".
General hazard: all relevant regulations
E)
must be complied with. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions".
General hazard: watch out for hot surfaces.
F)
CE marking: this indicates that the equip-
G)
ment is compliant with all relevant laws
applicable to the product.
3301300_ut_GB_rev.1
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
- 5 -
C
C
E
D
G
A
H
WEEE symbol: indicates that the appliance
H)
is subject to specifi c waste disposal regula-
tions.
F
37M3202
C
B
GB
ENGLISH
Werbung
