Bergstrom TRP COMPACT N&D Montageanweisungen Seite 19

COMPACT N&D
- Important: When connecting the unit make sure
the polarities are not reversed. If this happens, the
control board will not switch on and the unit will
not operate.
Tools required for assembly
- Torx wrenches set
- Allen wrenches set
- Open-jawed spanner 10, 13, 14
- Scissors
- Flexo-meter
Proper use of the product
- COMPACT N&D is a roof-mounted air
conditioning unit suitable only for use in trucks.
It is not suitable for installation and operation in
agricultural or construction machinery subject to
intense vibrations.
- Non-intended use will void the unit's warranty and
exempts the manufacturer from any responsibility.
- If you are not sure how to use COMPACT N&D,
read the product's user manual.
- If the temperature in your vehicle's cab is too
high for rest, first cool the cab with your vehicle's
air conditioning for a few minutes and then
run COMPACT N&D to maintain the comfort
temperature.
Associated documentation
- Quick guide: 1000959581
- User manual: 220AA61002
- List of spare parts: 1003460382
- Troubleshooting: 1001238881
Dirna Bergstrom declares that the COMPACT
N&D unit complies with the requirements of the
following EC Directives and that the harmonised
standards and technical specifications listed below
have been applied:
- EC Directive 2014/53/EU
- EC Directive 2011/65/EU
- EC Directive 2014/30/EU
19
EN