Profitec MOVE Bedienungsanleitung Seite 132

Fault
Water is coming out be-
tween the portafilter and
the brew group.
The water tank cannot be
fully inserted.
The advanced menu set-
tings are not shown.
The machine is switched
on and the steam tilt
valve is open, but no
steam is coming out of
the steam nozzle.
The machine is not react-
ing to inputs.
MOVE_BA_V1.0
Cause
The portafilter has not
been installed correctly.
The gasket is worn.
The water tank is in the
wrong orientation.
The menu is hidden.
The steam nozzle is
blocked.
The boiler temperature
has not been reached.
Steam boiler switched off.
The settings were
changed or other un-
known causes.
Solution
Install the portafilter
correctly (see Chapter 9.7,
"Inserting the portafilter
in the brew group").
Replace the gasket (see
Chapter 12.3, "Replacing
the brew group gasket").
Orient the water tank cor-
rectly and try again (see
Chapter 11.5.1, "Orientation
of the water tank").
Call up the advanced set-
tings menu (see Chapter
10.4, "Advanced menu
(user) settings").
Clean the steam nozzle
(see Chapter 11.3, "Clean-
ing the steam and hot
water nozzles").
Wait until the set steam
temperature (see Chapter
10.3.3, "Steam Temp") has
been reached.
Switch on the steam
boiler (see Chapter 9.3.3,
"Switching the steam
boiler on or off").
Reset the machine (see
Chapter 13.1.1, "Resetting
the machine").
EN - 133