Inserting The Portafilter In The Brew Group - Profitec Move Bedienungsanleitung

9.7

Inserting the portafilter in the brew group

NOTICE
Damage due to overtightening of the portafilter
When inserting the portafilter, the portafilter or machine may become
damaged if overtightened.
• Carefully tighten the portafilter.
• Only tighten the portafilter until you can feel some resistance. Do not
turn it too much.
It is recommended to leave the portafilter clamped in the brew group so that
it does not cool down. If the portafilter becomes too cold, it can be warmed up
with a flush. Do not fill the portafilter with ground coffee when doing this.
Fig. 7 Portafilter installed, handle pointing to the front
MOVE_BA_V1.0 EN - 101