8 Initial start-up
When using the machine for the first time, make sure that:
•
the machine has been correctly installed (see Chapter 7, "Installation"),
•
the mains plug is disconnected from the power supply,
•
the drip tray has been inserted correctly (see Chapter 1, "About these
operating instructions"), and
•
the steam and hot water tilt valves are closed (see Chapter 5.2.4,
"Operating levers").
8.1
Initial start-up
1
2
Fig. 5
Figure without portafilter installed
1
Display
2
On/off button with LED ring
3
Brew group
MOVE_BA_V1.0
4
Bottom brew button
5
Top brew button
5
4
3
EN - 93