Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting the brew time with deactivated pre-infusion
After pre-infusion has been deactivated for the desired brew button ("OFF"):
1.
Briefly press the same brew button.
The LED of the brew button flashes and a timer starts on the display.
¾
2.
After the desired brew time has elapsed, press the brew button again.
The time value flashes for 2 seconds on the display. The brew button is
9
now programmed with the desired brew time.
10.3.7
Eco Mode
The following eco mode setting is set by default:
•
"30": Countdown of 30 minutes until activation of ECO mode
The function can be set to a value of between 30 and 600 minutes or switched
off ("OFF"). The countdown can be set to a maximum of 600 minutes in steps
of 30 minutes. Proceed as follows:
1.
Brew
Temperature
2.
Eco Mode
3.
10.3.8
Cleaning Reminder
A reminder for the next brew group clean can be set via the menu. This
reminder function is deactivated ("OFF") by default. To activate the function,
the number of cups is set to a value of between 10 and 200 cups (shots) in
steps of 10.
This function is deactivated ("OFF") by default. It is recommended to clean
the brew group after 90 to 140 shots. Only a brewing process of more than 15
seconds is counted as a portion of espresso.
1.
Brew
Temperature
2.
Cleaning
Reminder
3.
MOVE_BA_V1.0
Open the main menu.
Select and open the "Eco Mode" submenu.
Select and confirm the desired setting.
Open the main menu.
Select and open the "Cleaning Reminder" submenu.
Select and confirm the desired setting.
EN - 115
Werbung
