Profitec MOVE Bedienungsanleitung Seite 101

9.8 Performing a flush
9.8.1 Flush after heating up
The machine heats up after being switched on. If the function "Enable Fast
Heating" is activated, the machine quickly heats up to approx. 120°C in order
to heat up the brew group faster. When this temperature has been reached,
the "Flush" icon appears on the display. This icon indicates that a flush needs
to be performed within 60 seconds in order to lower the boiler temperature to
the normal set temperature:
EN - 102
View of brew group from below
1. Hold the portafilter with one hand.
2. Position the portafilter under the brew group so
that the handle of the portafilter is at an angle of
approx. 45° to the left.
3. Push the portafilter into the holder of the brew
group until the wings on the portafilter engage in
the recesses on the brew group.
4. Carefully turn the portafilter handle to the right until
you feel some resistance.
The portafilter is now installed in the brew group.
9
Brew icon
This icon appears when one of the brew buttons is pressed to
start the brewing process.
"Flush" icon
Request to flush
"Ready Go" icon
Request to end the flush process
MOVE_BA_V1.0