Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 Quick guide to your first espresso
When preparing an espresso, please adhere to all safety instructions and
warnings contained in these operating instructions. Before preparing
your first espresso, the machine must have been installed (see Chapter 7,
"Installation") and started up (see Chapter 8, "Initial start-up") correctly.
MOVE_BA_V1.0
1.
Switch on the machine using the on/off button.
The LED ring will light up and the brew boiler will
¾
start to heat up.
2.
Wait until the brew temperature has been reached.
3.
Fill the desired portafilter with ground coffee.
4.
Position the portafilter at an angle of approx. 45°
below the brew group.
5.
Push the portafilter into the holder of the brew
group until the wings on the portafilter engage in
the recesses on the brew group.
6.
Carefully turn the portafilter handle to the right until
you feel some resistance.
The portafilter is now installed in the brew group.
¾
7.
Press one of the brew buttons.
The LED of the brew button that was pressed will
¾
start to flash and the espresso brewing process will
begin.
8.
Wait until this process has automatically ended
after the preset period or press the brew button
again to manually end the process once you have
got the desired amount of coffee.
The button LED lights up continuously and residual
9
water will be drained and residual pressure released
via the residual water outlet of the brew group.
EN - 81
Werbung
