Replacing The Water Filter; Replacing The Brew Group Gasket; Required Tools And Accessories; Before Replacement - Profitec Move Bedienungsanleitung

Accessory
Water filter
Tamper station
Tamper pad
Coffee grounds drawer, stainless steel
Milk jug, 350 ml
Milk jug, 500 ml
Filter screen
4x Pro Cups Espresso
4x Pro Cups Cappuccino
12.2

Replacing the water filter

No reminder function is set for the machine by default. If the function is set
via the menu, a corresponding icon indicating that it is time to replace the
water filter appears after a preset amount of water has been used.
"Waterfilter Reminder" icon
Information on the procedure and on the intervals for replacing the water filter
can be found in the manufacturer's specifications for the water filter used.
12.3

Replacing the brew group gasket

12.3.1

Required tools and accessories

• Cleaning brush
• Portafilter without filter
• Spare gasket, not included in scope of delivery
• Flat-head screwdriver, not included in scope of delivery
• 3 mm Allen key, not included in scope of delivery
12.3.2

Before replacement

1. Switch off the machine and disconnect the mains plug from the mains.
2. Allow the machine to cool down.
3. Empty (see Chapter 11.6, "Emptying the steam boiler") and clean (see
Chapter 11, "Cleaning") the machine.
4. Remove the grid and drip tray.
5. Unpack the spare parts and lay them out ready.
EN - 130
Item number
89445.K
Pr5130
Pr5115
Pr5230
Pr5200
Pr5210
Pr5140
Pr5127
Pr5128
MOVE_BA_V1.0