10Config Envm Load-Priority; 11Config Envm Usb-Compatibility - Hirschmann Hios-2S Rspe Referenzhandbuch
Rail switch power enhanced
Configuration
10.2.10config envm load-priority
Configure the order of configuration load attempts from memory devices at
boot time. If one load is successful, then the device discards further attempts.
Mode: Global Config Mode
Privilege Level: Operator
Format: config envm load-priority <P-1> <P-2>
Parameter Value
sd
P-1
usb
disable
P-2
first
second
10.2.11config envm usb-compatibility
Changes the USB compatibility mode. The changes take effect only after
saving the settings and rebooting the device.
Mode: Global Config Mode
Privilege Level: Operator
Format: config envm usb-compatibility <P-1>
Parameter Value
normal
P-1
compatibility
no config envm usb-compatibility
Disable the option
Mode: Global Config Mode
Privilege Level: Operator
Format: no config envm usb-compatibility <P-1>
RM CLI HiOS-2S RSPE
Release 6.1 09/2016
Meaning
SD-Card
USB Storage Device
Config will not be loaded at all
Config will be loaded first. If successful,
no other config will be tried.
Config will be loaded if first one does not
succeed.
Meaning
Normal Mode
Compatibility Mode
10.2 config
151
Kapitel
