IEEE 802.1x (Dot1x)
17.2.3 dot1x port-control
Set the authentication mode on the specified port.
Mode: Interface Range Mode
Privilege Level: Operator
Format: dot1x port-control <P-1>
Parameter Value
auto
P-1
force-authorized
force-unauthorized
17.2.4 dot1x re-authentication
Enable or disable re-authentication for the given interface.
Mode: Interface Range Mode
Privilege Level: Operator
Format: dot1x re-authentication
no dot1x re-authentication
Disable the option
Mode: Interface Range Mode
Privilege Level: Operator
Format: no dot1x re-authentication
RM CLI HiOS-2S RSPL
Release 5.0 05/2015
Meaning
Port is actually controlled by protocol.
Port is authorized unconditionally (de-
fault).
Port is unauthorized unconditionally.
17.2 dot1x
265