Device Security
13.1.6 security-status monitor bypass-pwd-
strength
Sets the monitoring whether at least one user is\nconfigured to bypass
strength check.
Mode: Global Config Mode
Privilege Level: Administrator
Format: security-status monitor bypass-pwd-strength
no security-status monitor bypass-pwd-strength
Disable the option
Mode: Global Config Mode
Privilege Level: Administrator
Format: no security-status monitor bypass-pwd-
strength
13.1.7 security-status monitor telnet-enabled
Sets the monitoring of the activation of telnet on\nthe switch.
Mode: Global Config Mode
Privilege Level: Administrator
Format: security-status monitor telnet-enabled
no security-status monitor telnet-enabled
Disable the option
Mode: Global Config Mode
Privilege Level: Administrator
Format: no security-status monitor telnet-enabled
RM CLI HiOS-2S RSPE
Release 6.1 09/2016
13.1 security-status
189