Address-Conflict Protect-Interval; Address-Conflict Trap-Status - Hirschmann Hios-2S Rspe Referenzhandbuch
Rail switch power enhanced
Address Conflict Detection (ACD)
2.1.7
address-conflict protect-interval
Delay in milliseconds between two consecutive address protections.
Mode: Global Config Mode
Privilege Level: Operator
Format: address-conflict protect-interval <P-1>
Parameter Value
20..10000
P-1
2.1.8
address-conflict trap-status
If enabled, this trap reports an address conflict.
Mode: Global Config Mode
Privilege Level: Operator
Format: address-conflict trap-status
no address-conflict trap-status
Disable the option
Mode: Global Config Mode
Privilege Level: Operator
Format: no address-conflict trap-status
RM CLI HiOS-2S RSPE
Release 6.1 09/2016
Meaning
Delay between two consecutive protections
([ms], default 10000).
2.1 address-conflict
97
Kapitel
