Security-Status; Security-Status No-Link - Hirschmann Hios-2S Rspe Referenzhandbuch
Rail switch power enhanced
Device Security
13.2 security-status
Configure the security status interface settings.
13.2.1 security-status no-link
Configure the monitoring of the specific ports.
Mode: Interface Range Mode
Privilege Level: Administrator
Format: security-status no-link
no security-status no-link
Disable the option
Mode: Interface Range Mode
Privilege Level: Administrator
Format: no security-status no-link
RM CLI HiOS-2S RSPE
Release 6.1 09/2016
13.2 security-status
197
Kapitel
