Stryker PneumoSure Gebrauchsanleitung Seite 83

cracking, brittleness, or signs of perforation.
Only clean, dry, disinfected, and assembled tube sets should be sterilized in an
autoclave. Please follow the instruction manual of the autoclave you are using.
The manufacturer recommends autoclaving as follows:
134 °C / 3 bar / 5 min
Only clean, dry, disinfected, and assembled tube sets should be sterilized. Please
follow your gas sterilizer's instruction manual for proper use when using gas
sterilization.
Do not perform gamma ray sterilization.
Care and Maintenance
Autoclave sterilization
Gas sterilization
Gamma ray sterilization
EN
77