Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
7. Operation
1. Preparing machine
Base frame for BlueMax Mini Type 3
Drilling spindles
Drill bits
Connecting to extractor system
Connecting to compressed air supply
Connecting to the power supply
Add on "swivel unit with sensor roller"
Connecting BlueMax Mini hose
"without foot pedal"
Connecting BlueMax Mini hose
"with foot pedal"
Add on "hold-down clamp"
Accessory fence extension
2. Preparing for work
en
Setting drilling depth
Edge distance
Pendulum stops
Hold-down clamp
Die
3. Operating
Hold-down clamp
4. Fitting Hettich hinges
Setting up
Drilling
Pressing in
62
All manuals and user guides at all-guides.com
1. Preparing machine
62
62
63
63
63
63
63
64
64
64
64
64
65
65
65
65
65
66
66
66
67
67
67
68
The BlueMax Mini Type 3 is shipped in cardboard packaging.
A number of parts and components must be installed to
make the machine ready for operation. Once assembled, the
machine must be thoroughly cleaned.
Base frame for BlueMax Mini Type 3
Push work bench with sliding blocks onto the base profile
and fasten the fence runner bracket in place on the base
profile with clamping blocks and cheese head screws.
Fig. 15: Base frame with sliding blocks
Drilling spindles
The machine is delivered with drilling spindles ready moun-
ted. Drilling spindles not needed must be closed off with
the six blanks provided for unused chucks so as to prevent
the threaded pins from working themselves out and provide
effective protection from soiling.
Fig. 16: Drilling spindles
Werbung
