Hettich BlueMax Mini Typ 3 Betriebsanleitung Seite 59

3. Checking delivery for missing items
Refer to the order confirmation or the list in this operating
manual as well as the delivery note to ascertain what should
be included. On receipt, immediately check to make sure a
delivery is complete. Notify the shipping company making
the delivery of any missing parts (notice of loss) and also
immediately inform Paul Hettich GmbH & Co. KG.
4. Dealing with shipping damage
Immediately after arrival and unloading, thoroughly check
the machine for any shipping damage, i.e for externally
visible damages (fractures, dents, kinks, cracks etc.).
Any suspected shipping damage must immediately be:
• reported in writing to the shipping company making the
delivery (forwarder) and/or
• reported in writing to your own insurance company as well
if the transportation risk was insured by the owner
5. Site of installation
An even standing surface with a sufficient load capacity is
essential for setting up the machine in a proper and safe
manner. Any unevenness in the standing surface must be
evened out by metal shims to ensure that the machine is not
standing in a distorted manner.
The BlueMax Mini Type 3 comes in secure shipment
packaging for safe transportation. A number of components
must be installed to make the machine ready for operation.
After installing the machine, it must be cleaned.
Secure the machine on a bench / base frame to be provided
at the site of installation so as to prevent it from falling.
CAUTION
Risk of crushing!
Allow a space of at least 500 mm between moving
machine parts and pillars, parts of the building, cabinets
etc.!
Do not stand any laden pallets in this safety zone!
All manuals and user guides at all-guides.com
en
59