Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Start up
6. Start up
1. General
2. Starting up for the first time
3. Safety check
4. Malfunctions on start up
5. Carrying out trial run
6. Concluding start up
en
60
All manuals and user guides at all-guides.com
1. General
60
61
61
61
61
61
The instructions described here are to be understood as
minimum recommendations. Depending on operating
conditions, they may need to be broadened in order to
maintain the machine's working quality.
Servicing and maintenance work in specific disciplines
(pneumatics etc.) must only be carried out by skilled persons
trained in that particular discipline.
Observe the following safety advice!
WARNING
You could get crushed by moving parts if the machine is
not shut down.
The machine must be depressurised and disconnected
from the power supply before carrying out
maintenance and cleaning work!
NOTE
Improper repair will result in damage to the machine!
Improper dismantling and assembly may result in
property damage or consequential damage to the
machine.
Therefore, when carrying out any removal or dismantling
activity, always:
• mark parts that belong together
• mark or make a note of the position and point of
installation
• remove and store assemblies separately
After carrying out maintenance work, always:
• check all screw connections to make sure they are tight.
Close and screw down all covers
As with starting up, listen for unusual noises and check to
see if there is any heat buildup!
Werbung
