Hettich BlueMax Mini Typ 3 Betriebsanleitung Seite 48

General
2. General
1. Intended use
2. Foreseeable incorrect use
3. Description of the machine
Space required by the machine
Machine life
4. Liability
en
48
All manuals and user guides at all-guides.com
1. Intended use
48
48
49
49
49
49
2. Foreseeable incorrect use
WARNING
The machine must only be used in for its intended
purpose and be in a perfectly safe condition!
Operating safety is only guaranteed if the machine is
used for its intended purpose!
The BlueMax Mini Type 3 is a semi automatic drilling and
insertion machine for panel type workpieces. This machine
must only be used for working on flat panels made of wood-
based materials, such as chipboard, blockboard panels, MDF,
solid wood or similar materials.
Any other use beyond this is deemed to be improper and non
intended use.
Intended use also includes following the operating, servicing
and maintenance conditions prescribed by the manufacturer.
Unauthorised changes to the machine will result in the
loss of product liability and liability on the part of the
manufacturer for resultant damage.
Any other use beyond this is deemed to be non intended
use. The manufacturer shall not be liable for any damage
this causes, with the risk involved being borne solely by
the user.
WARNING
Hazards may occur if the system is used incorrectly!
The following situations in particular are deemed to
be foreseeable hazardous situations:
• improperly assembling, starting, operating and servicing
this machine,
• operating the machine with faulty safety guards,
• operating the machine with improperly fitted safety
guards,
• operating the machine with non-functioning safety
guards and protective equipment,
• failing to observe the information and instructions given
in the operating manual in relation to handling, storing,
assembling, starting, operating, servicing and setting up
this machine,
• unauthorised structural modifications,
• unauthorised changes to this machine's drive system
(power output, speed),
• inadequate monitoring of machine parts subject to
particular wear,
• improperly performed repairs and
• disasters caused by the impact of foreign objects and
Acts of God.