Telecom Behnke 20-0005-BS Anleitung Seite 98

Instructions for Behnke Hybrid series 20-0005-BS, SIP intercoms series 20-0005B-IP
GB
Specifications
Relay
Quantity: 2
Operating mode: Adjustable per relay: Door opener relay, connection indicator,
Switching voltage: 30 VDC / 30 VAC max.
Switching current: 2 A max.
Switching capacity: 60 W / 60 VA max.
Switching contact: when operating as a door opener relay: Normally open or normally
Door opener relay: Control of a door opener for opening an access
Opening time: 1-90 s
Connection indicator: Control of the relay when the device is connected, can be activated
Additional bell: Triggering the relay during ringing on an incoming call, at the begin
Fault indication: Control of the relay when a fault (network connection,
98
additional bell or fault indication
closed contact
Misc.: Normally open contact
Codes: 9 max., valid for in-house remote station or code lock, always or
according to schedule
manual, permanent opening (can be activated via codes) or
automatic opening according to schedule possible
Activation via door opener button possible, always or according to
schedule
Logging of access control by e-mail
for incoming connection, outgoing connection or outgoing connection
after the remote station is answered
ning of a direct call (1-90 s) or during setup of a direct call
SIP registration) is present on the device
www.behnke-online.de