Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instructions for Behnke Hybrid series 20-0005-BS, SIP intercoms series 20-0005B-IP
Here you can set how long a physical direct call button
must be pressed before the keystroke is recognised as valid and the button's configured call
number is called.
Increasing the actuation time can reduce false triggering. In most cases however, a minimum actua-
tion time is the correct setting.
This setting does not apply to direct call buttons that are connected via an expansion port.
Their actuation time is fixed and cannot be changed.
Maximum connection time
05
0 # unlimited
1 # 1 minute
:
:
9 # 9 minutes
The maximum duration for a connection is set here. For an outgoing call, the connection duration
starts after the remote station is answered. For an incoming call, it starts after the call has been
accepted. After the maximum connection time has elapsed, the connection is automatically discon-
nected.
Volume
06 0 #
Level 0 (0%)
1 #
Level 1 (11%)
2 #
Level 2 (22 %)
:
:
9 #
Level 9 (99 %)
*0 #
0%
:
:
*100 #
100 %
The volume of the speaker output can be set in levels from 0 (=quiet) to port. Alternatively, it is
possible to specify the desired volume in percent (*0 to *100).
www.behnke-online.de
Commissioning and Configuration
Default: 3
Default: *80
GB
79
Werbung
Kapitel
Inhaltsverzeichnis
