Telecom Behnke 20-0005-BS Anleitung Seite 90

Instructions for Behnke Hybrid series 20-0005-BS, SIP intercoms series 20-0005B-IP
GB
Commissioning and Configuration
Important!
In networks with DHCP server, 'dynamic' should be selected as address assignment!
IP configuration with static address assignment
76 IP address #
77 Subnet mask #
78 Gateway #
Here you can set the IP configuration that the device uses when the IP address assignment is set to
static. During input, points are entered by pressing the * key.
VLAN tag
79 1 #
:
4094 #
Here you can set the VLAN tag that will be used for the device's VLAN when 'VLAN' or 'VLANs for
device and webcam' is set as the network connection.
Perform action
97 0 #
1 #
2 #
3 #
4 #
5 #
Various actions can be triggered via this configuration step.
To enable us to provide you with optimum support in the event of a support case, you can transfer
diagnostic data and network traces directly to our support server here. After consultation with our
support, you can also enable us to remotely access your device via configuration step 97 1 #.
Very important note
Diagnostic data and network traces contain, among other things, data on the device, configuration,
network, connections, audio, video and errors that have occurred. By submitting this information to
us, you agree that we may use it for support purposes. If you grant us remote access, you addition-
ally agree that we may change the configuration of the device for support purposes.
90
Day 1
:
Tag 4094
Disable online log and online support
Enable online log and allow online support
Send diagnostic data to support
Send trace to support
Restart system
Activate inactive slot
Default: 192,168,100,100
Default: 192,168,100,100
Default: 255.255.255.0
Default: 1
Default: 0
www.behnke-online.de