Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Instructions for Behnke Hybrid series 20-0005-BS, SIP intercoms series 20-0005B-IP
GB
Contact
Important Information
Please note that Behnke intercoms and accessories may only be installed and serviced by qualified
electricians, IT and telecommunications technicians who comply with the corresponding norms and
regulations. Before carrying out service and maintenance work, please ensure that the devices are
safely disconnected from the power grid (unplug power supply unit/POE injector) and are discon-
nected from any other network and that all relevant safety regulations will be maintained.
Prolonged direct exposure to sunlight can cause the device to heat up considerably, especially for
devices with a dark front panel or when the device is installed in an insulated wall.
In such a case, the device must be cooled for a sufficiently long time before removal.
Above all, be careful when touching the electronics housing!
Please hand over this manual with the corresponding information about the intercom station to
your customer.
For further legal information, please see from page 103.
contact
Information
For detailed information on our products,
projects and services:
+49 (0) 68 41/81 77-700
24-hour service:
Do you need help? Feel free to contact us
24/7
We will be happy to assist you with any
technical questions you may have and we
will also help you getting set-up.
+49 (0) 68 41/81 77-777
54
Telecom Behnke GmbH
Gewerbepark „An der Autobahn"
Robert-Jungk-Straße 3
66459 Kirkel
Germany
Internet and email address
www.behnke-online.de
info@behnke-online.de
www.behnke-online.de
Werbung
