Telecom Behnke 20-0005-BS Anleitung Seite 86

Instructions for Behnke Hybrid series 20-0005-BS, SIP intercoms series 20-0005B-IP
GB
Commissioning and Configuration
Call number for direct call button
20 Call number #
21 call number #
22 call number #
23 call number #
24 call number #
25 call number #
26 call number #
27 call number #
28 call number #
29 call number #
2*10 call number # key 10
2*11 call number #
:
2*75 call number # key 75
The following special symbols are allowed when entering call numbers:
*0 = dial *
*1 = dial #
*2 = P = pause for 2 seconds
*3 = p = pause for 1 second
*4 = R = flash function
*5 = ; = call chain
*6 = , = group call
*7 = ana: = analogue call
*8 = sip: = SIP call
** = .
*# = @
Call number for speed dial number
300 Call number # Speed dial number 00
301 Call number # Speed dial number 01
399: Call number # Speed dial number 99
Call numbers consist of digits only and may be up to 50 digits long.
The speed dial function of the keypad can be allowed via configuration step 16. It allows a 2-digit
speed dial to be entered via the keypad. The speed dial function is called up via the + key of the
keypad.
86
i key on the keypad
key 1
key 2
key 3
key 4
key 5
key 6
key 7
key 8
key 9
key 11
bei mehr als 8 Ruftasten Multitastenplatine
notwendig.
:
www.behnke-online.de