Herunterladen Diese Seite drucken

Batavus RECREATIEF Bedienungsanleitung Seite 95

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

changed, the angle of the handlebars
will probably need adjusting. Loosen
the stem bolt slightly more than one
turn. Turn the steering tube and tigh-
ten the bolt fi rmly again (8) (see table
of tightening torques).
5. Check whether the brake and gear
cables are not too tight now you have
altered the position of the handlebars.
The braking, gear shifting and steering
behaviour of the bicycle may be affec-
ted as a result.
6. Before you go cycling (again), check
the brakes and gear shifting; replace
the covering cap and exert pressure
until it closes with a 'click'.
TECHNIQUE / MODEL B
This steering pin (6) can be raised or
lowered by loosening the steering
pin bolt in the same way as for model
A. The position of the stem can be
changed by loosening the recessed
head screw in the middle of the stem.
TECHNIQUE / MODEL C / ERGO MATIC
This steering pin is called the Ergo Ma-
tic (7) and it works with a lever which
can turn 135°.
If your model has one of these levers, it
is not necessary to loosen the recessed-
head screw fi rst. You can simply unclick
the lever so that it is loose, turn it to
the right and then place the steering
(8)
pin in the desired position. Return the
lever and click it back into position.
TECHNIQUE / MODEL D / BATAVUS
ERGO MATIC PLUS
The Batavus Ergo Matic Plus adjustable
steering pin enables you to adjust the
position of your handlebars very easily.
The wireless bicycle computer type
FC650 can be mounted on the Batavus
Ergo Matic Plus adjustable steering pin
as an extra enhancement.
T E C H N I Q U E
1. Press the red safety button on the
left and open the lever (9).
2. Place the handlebars in the desired
position.
3. Close the lever until the safety catch
clicks audibly (10).
I M P O R T A N T
• It is not permitted to adjust your
handlebars when cycling.
• Check wether your handlebars are
fi rmly secured before going cycling.
If your handlebars become too loose
after regular use, you should have this
corrected by your Batavus dealer. He
can adjust the clamping force for you
in the correct manner.
• Never open the adjusting lever wit-
hout fi rst pressing the red safety button.
• The Batavus Ergo Matic Plus adjus-
table steering pin was designed for
normal bicycle use. Mountain biking,
downhill racing and all other forms of
racing use ar not permitted.
(9)
(10)
5

Werbung

loading