General Application Instructions - HBM C10 Montageanleitung

General application instructions

3 General application instructions
Force transducers are suitable for measuring compressive forces. They
provide highly accurate static and dynamic force measurements and must
therefore be handled very carefully. Particular care must be taken when
transporting and installing the devices. Dropping and knocking the transducer
may cause permanent damage.
C10 series force transducers have a convex force application part, to which the
forces to be measured must be applied.
The specifications on page 34 list the permissible limits for mechanical, thermal
and electrical stress. It is essential to observe these limits when planning the
measuring set-up, during installation and, ultimately, during operation.
C10 11
A04036_01_YI0_03 HBM: public