Mounting The C10 As Delivered With An Adapter (Standard Version) - HBM C10 Montageanleitung

Fig. 6.1 Parasitic forces and moments
Notice
During installation and when the force transducer is operating, comply with the
maximum parasitic forces and moments: maximum eccentricity and lateral
forces. The limits of the sensor's load-carrying capacity can be found in
Chapter 11 "Specifications" on Page 34.
6.3 Mounting the C10 as delivered with an adapter
(standard version)
In this assembly variant, you can mount the C10 directly onto your structural
elements, or place it on a suitable substructure. The force transducer
measures static and dynamic compressive forces, and can be used at full
oscillation width.
C10
A04036_01_YI0_03 HBM: public
Mechanical installation
17