General Instructions For Use - HBM CFT Bedienungsanleitung

General instructions for use

4 General instructions for use
Force transducers are suitable for measuring compressive forces. They pro­
vide highly accurate static and dynamic force measurements and must there­
fore be handled very carefully. Particular care must be taken when transporting
and installing the devices. Dropping or knocking the transducer may cause per­
manent damage.
The permissible limits for mechanical, thermal and electrical stresses are listed
in section "Specifications" on page 19. It is essential to take these limits into
account when planning the measuring set-up, during installation and,
ultimately, during operation.
CFT 9
A02529_04_YCI_00 HBM: public