General Instructions For Use - HBM C11 Montageanleitung

4

GENERAL INSTRUCTIONS FOR USE

Force transducers are suitable for measuring compressive forces. They provide highly
accurate static and dynamic force measurements and must therefore be handled very
carefully. Particular care must be taken when transporting and installing the devices.
Dropping and knocking the transducer may cause permanent damage.
C11 series force transducers have a convex force application part, to which the forces to
be measured must be applied.
Chapter10 „Specifications", page 15 lists the permissible limits for mechanical, thermal
and electrical stress. It is essential to observe these limits when planning the measuring
set-up, during installation and, ultimately, during operation.
C11
8
GENERAL INSTRUCTIONS FOR USE