Rem440 Software - Technical Specifications - Interacoustics Affinity 2.0 Gebrauchsanweisung

3.3.1

REM440 software - technical specifications

Medical CE-mark:
Real Ear Measurement
standards:
Stimuli:
Frequency range: 100Hz – 10kHz
Frequency
accuracy:
Distortion:
Intensity range:
Intensity
accuracy:
Measurement intensity range:
Frequency resolution:
Probe microphone:
Reference microphone:
Intensity accuracy:
Cross talk
Available tests:
Compatible software:
Affinity2.0/Equinox2.0 – Instructions for Use - EN
The CE-mark in combination with MD symbol indicates that
Interacoustics A/S meets the requirements of the Medical Device
Regulation (EU) 2017/745 Annex I
Approval of the quality system is made by TÜV – identif ication no. 0123.
IEC 61669 2015, ANSI S3.46 2013
Warble Tone, Pure Tone, Random noise, Pseudo random noise, Band
limited white noise, Chirp, ICRA, Real Speech, any other sound f ile
(automatic calibration available).
Less than ± 1 %
Less than 2%
40 – 90 dB
Less than ± 1.5 %
Probe microphone 40-145 dB SPL ± 2 dB.
1/3, 1/6, 1/12, 1/24 octave or 1024-point FFT.
Intensity: 40 – 140 dB
Intensity: 40 – 100 dB
Less than ± 1.5 dB
Cross talk in the probe and probe tube will alter the obtained results with
less than 1 dB at all f requencies.
REUR
REUG
REIG
RECD
REAR
REAG
REOR
Noah 4, OtoAccess® and XML compatible
REOG
Input – Output
FM Transparency
Ear Level, FM only
Directionality
Visible speech mapping
Page 41