Layout Of The Software Display; General Operating Instructions - ECOLAB DryExxEco Advanced-ETH Betriebsanleitung

Layout of the software display

General operating instructions

10 Layout of the software display
Fig. 11: Control: Start screen
All of the screen/displays illustrated in this section are to be understood as
being examples and in no case contain real installed values on the on-site
system.
10.1 General operating instructions
General functions / enter and change values:
n Characters from 0 - 9 can be entered into the input fields.
n A number keypad is displayed.
n Following input and confirmation with the Enter button, the system keyboard is hidden
automatically.
n If the input is valid, the new value is transferred into the input field.
n With an invalid input, the new value is rejected and the old value is restored.
– The entered characters are right-aligned.
– When entering the first numbers, the rest of the field is set to "Zero", and for the
subsequent inputs, all characters already entered are moved to the left one
position (calculator format).
– If the maximum possible number of characters is exceeded, the last character
entered is overwritten.
In all screen displays, press the button
The screen then switches back to the previous screen.
In the same way, press the button
then switches to the „home screen"
screen)" on page 54 .
Rev. 02-09.2017
to exit the displayed screen.
to exit the displayed screen. The screen
Ä Chapter 10.3 „ „home screen" (start
52