ECOLAB DryExxEco Advanced-ETH Betriebsanleitung Seite 137

Connection
7 Connection
Personnel:
NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools during assembly,
maintenance or troubleshooting. Only use the correct tools.
DANGER!
Damage and injuries may occur if connection and installation work is
carried out incorrectly.
– All connection and installation work may only be performed by authorised
and trained experts in accordance with valid local regulations.
– The safety regulations and the required protective clothing must be
complied with.
Risk due to electrical energy
DANGER!
Risk of fatal injury from electric current!
Contact with live parts represents immediate danger to life due to electrocution.
Damage to the insulation or individual components can be life-threatening.
– Before starting work, create a de-energised state and ensure this state for
the duration of the work.
– Work on electrical components may only be carried out by professional
electricians.
– Turn off immediately and organise repairs if there is any damage to the
insulation voltage supply.
– Never bridge or decommission fuses.
– When replacing fuses, observe the correct rating.
– Keep voltage-carrying parts away from moisture, as this can cause a short
circuit.
Rev. 02-09.2017
n Manufacturer
n Qualified electrician
n Mechanic
NOTICE!
The protective earth connection is marked with one of
these symbols at the connection points.
38