Archive] - [Archive Selection] - [Current Day] - ECOLAB DryExxEco Advanced-ETH Betriebsanleitung

Layout of the software display
Overview: Archive > Archive - Archive Selection - current day
10.6.1

[Archive] - [Archive Selection] - [current day]

The views of the screen are identical in the day, month and year archives.
Only plants where valves are allocated are displayed.
Fig. 29: Program structure - Archive of current day
Displays „Archive of current day"
1. The „home screen"
the
ð The screen switches to the archive selection display Fig. 28.
2.
Press the
ð The screen switches to the section selection.
3. The button
required section.
ð The screen switches to the circuit selection.
4.
The button
circuit 2, or valve 2) or
the required circuit.
5. The „Archive Display" - „Archive of current day" is displayed.
Fig. 30: Archive of current day
1 Section number
2 BS-Mittel = belt lubricant (Bandschmiermittel)
3 Booster = additional activation of the dosing outside
automatic mode.
4 Selection of the line for the operating time
5 Selection of the „Line units" with the number of items
(unit counter, e.g. bottle counter, crate counter, etc.).
Rev. 02-09.2017
Ä Chapter 10.3 „ „home screen" (start screen)" on page 54 use
button to switch to the archive display.
button to select „Current Day" .
(e.g. Filler 1) or
(e.g. lubrication circuit 1, or valve 1),
(e.g. lubrication circuit 3, or valve 3) is used to select
66
(e.g. Filler 2) is used to select the
6 Specification of the selected archive. In this case
„Archive of current day"
7 Selection of consecutive valve number
8 Circuit number
(e.g. lubrication