Dryexxeco Control ® Advanced-Eth - ECOLAB DryExxEco Advanced-ETH Betriebsanleitung

9
DryExxEco control
Operating the control:
Fig. 10: HMI display
1 HMI display (Human Machine Interface)
2 Switch-on and error button
The plant is operated via an HMI display. An HMI is a touch-sensitive screen, i.e. buttons
and input fields are touched directly on the screen with a finger or with an object. At the
same time, you can monitor the operating condition of the plant and interact with the
working process of the system by simply touching the buttons and input fields directly.
NOTICE!
Do not use any sharp or pointed objects to operate the display, to avoid
damaging the plastic surface of the screen. Do not touch the screen at more
than one point simultaneously. Otherwise it may be that actions are initiated
accidentally in some circumstances.
When cleaning the display, it is essential to observe the instructions under
Ä Chapter 9.1 „Cleaning the touch-sensitive control panel
(touchscreen)" on page 50!
The individual screens are explained in detail in
software display" on page 52 .
DryExxEco control® Advanced-ETH
® Advanced-ETH
3
49
Main switch on the control
Ä Chapter 10 „Layout of the
Rev. 02-09.2017