Environmental Protection Measures - ECOLAB DryExxEco Advanced-ETH Betriebsanleitung

Safety
Explanation of the safety symbols used > Environmental protection measures
Hazard arising from automatic startup
DANGER!
Automatic startup poses a hazard in areas marked with the symbol opposite.
An automatic start-up can be initiated as soon as the power supply has been
created without having had to press a switch/button beforehand.
Hazards caused by pressurised components
DANGER!
Danger of injury from pressurised components!
With improper handling, pressurised components can move uncontrollably and
cause severe injuries. Liquid under high pressure can escape from these types
of components if handled improperly or in the case of a defect. This can lead to
severe injuries.
– Establish a pressure-free state.
– Discharge any residual energy.
– Make sure that liquids cannot discharge accidentally.
– Have defective components replaced by skilled personnel immediately.
2.8.3

Environmental protection measures

ENVIRONMENT!
The environmental symbol denotes environmental protection measures.
Rev. 02-09.2017 20