Monthly Archive; Archive Of The Year - ECOLAB Lubo-DryExx-Basic Bedienungsanleitung

Fig. 6.7
After leaving screen "daily archive" you come back to "Archive selection" (see chapter 6.2.3.1).
 Jump to screen "Monthly archive" (see chapter 6.2.3.1.2)
Button "2"


6.2.3.1.2 Monthly archive

Fig. 6.8

6.2.3.1.3 Archive of the year

Fig. 6.9
Fig. 6.10
NOTE
Any input outside of the range 1-12 will not be accepted by the control
After leaving screen "Archive of the year" you come back to "Archive selection"
(see chapter 6.2.3.1).
 Jump to screen "Archive of switch off" (see chapter 6.2.3.1.4)
Button "3"

417101633_DryExx_Basic
 Press "ENTER", the field "circuit" is flashing
 Select a circuit
 Button „ or "
 Confirm selection
 Button „ENTER"
 Leave screen and go back to "Archive selection"
(see chapter 6.2.3.1)
 Button "ESC"
 Jump to screen "Daily archive" Part 1
 Button "" after pressing circuit selection
 Button „ENTER",field "2 == January" is flashing
 Select a month
 Input the corresponding number for the required month
between 1 and 12
 Confirm selection
 Button „ENTER"
 Jump to screen "yearly archive" (see chapter 6.2.3.1.3)
 Button „1"
 Press "ENTER", the field "circuit x" is flashing
 Select a circuit
 Button „ or "
 Confirm selection
 Button „ENTER"
 Leave screen and go back to "Archive selection"
(see chapter 6.2.3.1)
 Press button "ESC"
 Jump to screen "Monthly archive" Part 2 (see Fig. 6.10)
 Button ""
 Press "ENTER", the field "circuit x" is flashing
 Select a circuit
 Button „ or "
 Confirm selection
 Button „ENTER"
 Leave screen and go back to "Archive selection"
(see chapter 6.2.3.1)
 Button "ESC"
 Jump to screen "Monthly archive" Part 1 (see Fig. 6.9)
 Button ""
- 31 - Rev.: 6-02-15