Functional Description; Description Of The Dryexx ® System - ECOLAB DryExxEco Advanced-ETH Betriebsanleitung

5

Functional description

You must strictly observe the additional components manufacturer's operating
instructions that have been supplied.
The Lubo-DryExx applicator stations
belt lubrication plants with belt lubricant.
The complete system comprises the Lubo-DryExx applicator station
the control unit DryExxEco
The system is used for dosing DryExx
unit DryExx®
5.1
Description of the DryExx
®
The DryExx system consists essentially of an applicator station with a diaphragm
compressed air pump, a control unit as well as the standard piping and nozzle system.
Various types of control unit are available dependent upon the size and specification of
the installation.
The standard supply and piping system is produced in stainless steel, but PE piping is
available as an option.
The distribution circuit is in line with the requirements of the installation and where it is
sited, but essentially is a wet lubrication system.
NOTICE!
The number of nozzles per lubrication circuit is max. 50 – 60!
The standard nozzle system has welded nozzle fittings. For conveyors with more than two
tracks, the number of tracks - 1 is used to calculate the number of nozzles.
The inserted nozzles have a throughput of approx. 3 litres per hour at a spray pressure of
0.2 MPa (2 bar). In order to prevent leakage over time from the nozzles, ball-bearing valve
filters with an opening pressure of 0.14 MPa (1.4 bar) are used.
® Advanced-ETH.
®
Advanced-ETH for up to 16 lubrication circuits in a total 10 plants.
® system
® are devices for the automatic supply of DryExx®
®
belt lubricant products and is used via the control
29
Functional description
Description of the DryExx® system
®
in combination with
Rev. 02-09.2017